DIY: HALLOWEEN PORCH HOLDER CANDY

﻿
GETTING STARTED

This year may have felt like a bunch of tricks, but that doesn’t mean we should miss out on the treats! This DIY Halloween porch candy holder project is a great solution to celebrating safely during COVID-19. So dig out that Arrow GT300 professional high-temp glue gun and T50 heavy-duty staple gun to get started!

YOU WILL NEED

GT300
Professional High-Temp Glue Gun

BUY NOW

T50
Heavy-Duty Staple Gun

BUY NOW

OTHER TOOLS
 Tape measure or ruler
 Sanding block
 Marker
﻿
MATERIALS
 Arrow all-purpose glue sticks
 T50 staples
 Standard-size wood pallet (48" X 40")
 Clothespins
 Decorative banner
 Paper candy bags
 Candy
 Decorative lights (optional)
 Spray paint (optional)

﻿START BUILDING﻿
﻿
STEP 1
Start by sanding down any rough edges on the pallet before assembly. Then if desired, spray paint your pallet and let it dry before moving on to the next steps.

﻿
STEP 2
Next, arrange your pallet so the boards run horizontally rather than vertically. Center your decorative banner at the top of the pallet (against the top-most horizontal board). Using your T50 heavy-duty staple gun, staple each end of the banner strings so that the decorative banner hangs when the pallet is in place on your porch.

STEP 3
If desired, gently wind your light strands up and over the banner string and repeat all the way across. Ours stayed in place without stapling, but depending on how heavy your lights are, you may need to secure them to the pallet with staples.
﻿
﻿

STEP 4
Using your tape measure or ruler, measure and mark where you’d like to glue your clothespins. We glued ours so that we’d have three rows of five bags, each spaced about 5″ apart.
﻿

STEP 5
Next, use your GT300 professional high-temp glue gun to secure each clothespin in place.

﻿
STEP 6
Finally, fill your bags with candy and hang them on to your pallet with the clothespins.

﻿
STEP 9
Once the framed pegboard is securely in place, it’s time to decorate! Additional pegboard hooks can be purchased from home improvement stores or online. This is the perfect time to put your own special touch on the project.

﻿FINISHED PRODUCT﻿

You can decorate your candy holder however you’d like! Add some fun fake spiderwebs or go crazy with gourds. Whether you're team candy bar or candy corn, don't forget to fill your treat bags with everyone's favorite goodies!
﻿
Share your work with us on Facebook and Instagram by tagging @ArrowFastener or using #MadeWithArrow.
﻿

WANT TO BE A FEATURED ARROW BLOGGER?

We’d love to hear from you! If you would like to be an Arrow Project 
Partner and contribute future posts here, contact us at projects@arrowfastener.com
We look forward to hearing from you!